Wines & Vines

May 2018 Packaging Issue

Issue link: http://winesandvines.uberflip.com/i/975273

Contents of this Issue

Navigation

Page 63 of 91

WINERY & VINEYARD EQUIPMENT 64 WINES&VINES May 2018 PRODUCT FOCUS Tools in Cap Management Innovations in tank mixing as well as new devices for small-lot fermentations By Andrew Adams L ee Miyamura has worked at Treasury Wine Estate's winery near Paso Robles, Calif., since 1990. In that time, the winemaker and her team have signifi- cantly expanded production while also seeking to improve operational efficiency. The winery's fermentation tanks had originally been outfitted with air pumps dedicated for run- ning pumpovers for red ferments. "As we kept expanding that necessitated us to look at different methods for managing fermentation," she said. That included a look at using compressed air for tank mixing, although Miyamura said she had initially been concerned about it speed- ing up fermentation and being too extractive. Initial trials were followed by an investment in the air mixing technology and now Miyamura has plans to retrofit some tanks for the system. "I've come to find I have a preference for Pulsair during the fermentation process," she said. Pulsair was one of the first companies to bring compressed air tank mixing to the wine industry and now offers a wide line of products to conduct "Pneumatage" or winemaking using the method. Air mixing has been one of the most significant advances in cap management and this Product Focus report will look at that and some other tools for more traditional cap management. Several suppliers, mostly Euro- pean companies, manufacture tanks with a variety of ways to mix, wet or break up caps but that will be the focus of another report. Air mixing turns tanks faster TWE Paso Robles, formally the Meridian Winery, ferments grapes from all over California for the company's premium wines priced $25 to $35. The winery has 138 fermentors that range in size from 24 tons to 72 tons. Each tank is turned about three times during a typical harvest. Miyamura said air mixing has proved a useful way to handle all those grapes and still account for vineyard and appellation variation. The air mixing system is managed through a Pulsair control box but can also be monitored through the winery's tank temperature control system by Ignition, which is a software plat- form developed by Inductive Automation. The Ignition system works with the Pulsair controls as well as Allen Bradley process controllers on the cellar floor and is also used to monitor refrigeration, water use and even the status of cross-flow filters and centrifuges. Miyamura can monitor and control the entire system from her desktop and eventually from a tablet. She said one of the handiest functions of air mixing is that if a fermentation in one of the big tanks, which can accommodate 72 tons, gets too hot she can quickly send a pulse of air through the tank that breaks up the cap and dissipates the heat faster than waiting for cooler juice to trickle through the cap in a traditional pumpover. The winery's cellar supervisor, Guadalupe Gonzalez, also devised a quicker and safer way to empty tanks after fermentation. While the winery had already begun to sluice tanks out to empty them quicker and more safely, Gon- zalez tried pulsing the tanks with air prior to sluicing. The time needed to empty a tank went from 30 to 40 minutes down to 10 minutes or less. "That has worked out brilliantly," said cellar manager Karl Knupper. "It's a pretty good benefit to our labor efficiencies." Pulsing the tanks prior to emptying them will also flush out the carbon dioxide, mak- ing the job safer for the cellar worker even though the worker no longer has to enter the tank to dig it out. Safety and efficiency are two selling points of Parsec's updated Tank Mixing M.I. system. The Italian supplier updated its SAEn 5000 winemak- ing control system to incorporate the function. Andrew Beckwith, plant manager of the custom crush and private label facility ASV San Martin in Santa Clara County, California said he had the Parsec system installed on six, 16,000-gallon tanks in a trial during the 2017 vintage to improve labor efficiency and reduce the time to empty tanks. That trial has proved to be the first major project in which everyone — cellar workers, winemakers and ownership — have been happy with the results. The cellar staff were "ecstatic" that they weren't going to have move a pump over set up for each of those tanks and "in terms of quality we got better if not the same as the The Lotus pumpover irrigator by Vintuitive.

Articles in this issue

Archives of this issue

view archives of Wines & Vines - May 2018 Packaging Issue